Bean Dregs Dryer Machine Introduction
Bean dregs are the residue left over from the process of making bean curd. Since bean curd residue contains a lot of water, it needs to be dried before being processed and used. We have developed a complete set of soybean residue dryer production line according to the characteristics of bean dregs and market demand. Combined with high-efficiency pressure filtration and thermal drying, the rotary dryer can turn soybean residue into treasure.
Advantages of Bean Pulp Dryer
1. Simple structure, stable and convenient operation.
2. Mechanized control, large production capacity, continuous operation.
3. Special dispersing device is adopted inside to ensure sufficient mass and heat exchange of materials.
4. After the drying section, subsequent sections such as crushing, mixing, pelletizing, and packaging can be connected to produce the finished bean dregs feed pellet.
Application of Bean Residues Dryer
The bean dregs dryer has a wide range of applications. It can not only dry bean curd dregs, but also dry soybean dregs, potato dregs,
cassava pulp,
fruit residues, sugar beet pulp, and other dreg materials.
Bean Residues Dryer Working Principle
The bean curd residue material first enters the drum of the dryer through the conveyor. As the drum of the dryer rotates continuously, and a special dispersing device is set in the drum, the contact area between the material and the high-temperature hot air is enlarged, so that the material moisture is greatly reduced. The bean dregs dryer adopts downstream drying method to dry the materials. The materials after drying are discharged from the discharge port to complete the whole drying process of the materials.
Technical Parameters
|
Model |
DDSG1208 |
DDSG1408 |
DDSG1610 |
DDSG2010/3 |
DDSG2210/3 |
DDSG2510/3 |
DDSG2512/3 |
DDSG2912/3 |
|
Capacity (t/d) |
43.7 |
52.5 |
75.8 |
169.0 |
186.5 |
215.5 |
262.2 |
317.6 |
|
Output (t/d) |
25.7 |
30.9 |
44.6 |
99.4 |
109.7 |
126.7 |
154.2 |
186.8 |
|
Water evaporation (t/h) |
0.75 |
0.90 |
1.30 |
2.90 |
3.20 |
3.70 |
4.50 |
5.45 |
|
Initial moisture (%) |
80±5% (Mechanical dehydration to about 68%, and then drying) |
|
Final moisture (%) |
12%(adjustable) |
|
Drying temperature (℃) |
350-450℃ |
|
Power(kw) |
55 |
75 |
95 |
140 |
170 |
210 |
260 |
300 |
|
Floor area (m2) |
5m*20m |
5m*20m |
6m*22m |
8m*25m |
8m*25m |
10m*28m |
10m*30m |
10m*30m |
